Nortel Networks NN10265-111 - Manual (Page 96)

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
96 Copyright © Nortel Networks Limited 2006
Figure 41 Red Hat: Formatting partitions
Completing the installation
The following procedure includes instructions for completing the
installation.
From the terminal server
1 The LILO Configuration screen appears. Ensure the User linear
mode (needed for some SCSI drives) is selected.
2 Type the boot arguments for LILO as follows:
console=ttyS1,9600n8 <Enter>
Choose Partitions to Format
What partitions would you like to format? We strongly suggest
formatting all of the system partitions, including /, /usr,
and /ar. There is no need to format /home or /usr/local if
they have already been configured during a previous install.
[*] /dev/sda2 /
[*] /dev/sda7 /IMS
[*] /dev/sda1 /boot
[*] /dev/sda6 /usr
[*] /dev/sda5 /var
OK Back
[ ] Check for bad blocks during format