Nortel Networks NN10265-111 - Manual (Page 45)

MCS 5100 RTP Media Portal Basics
45 Copyright © Nortel Networks Limited 2006
Figure 22 Add from the Configuration menu
After Add > Component is selected, you must wait for the load
list to retrieve.
3 The Load List window appears with all available component
loads (except for those components already deployed to the
server).
Figure 23 Load list for adding
4 Select the desired software load version for the RTP Media
Portal. Click on the Apply button.
5 You will be prompted to configure the RTP Media Portal. For a
description of these tabs and properties, please refer to
Configuration tabs and properties on page 47 .
6 After entering the appropriate configuration information, enter a
label (six characters or less) in the Service Component Name
field. This label is the component name that appears in the
System tree after deployment. Click on the Apply button. A
progress screen appears while it deploys.