Nortel Networks NN10265-111 - Manual (Page 40)

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
40 Copyright © Nortel Networks Limited 2006
communications. No action is required. An associated alarm is
raised for each Media Blade which does not respond.
• Blade Recovery-Mode Initiated, RTP909, indicates that the Host
CPU was able to re-establish communication with a subtending
Media Blade and that the Media Blade is supporting connections.
No action is required.
• Blade Recovery-Mode Completed, RTP910, indicates the Host
CPU was able to re-establish communication with a subtending
Media Blade and reports the number of connections the Host CPU
was able to restore control over. No action is required.
• Connection Map Increase Capacity, RTP911, generated
whenever it is necessary for an increase in the size of the Hash Map
used to store connection information. This may indicate a need for
additional RTP Media Portal resources.
• Connection Map Increase Capacity Denied, RTP912, generated
whenever a request for an increase in the size of the Hash Map is
denied. This indicates the Hash Map has already doubled in size,
and prevents unbounded increases in the size of the Connection
Map. Report this log to your next level of support.
• Connection Map Increase Capacity Failed, RTP913, generated
whenever a request for an increase in the size of the Hash Map fails
due to some unforeseen software issue. Report this log to your next
level of support.
• Connection Not Found, RTP914, generated whenever an audit is
performed over the Connection Map and a particular connection is
not found on the corresponding Media Blade to match the entry in
the Connection Map. No action is required.
• Connection Idle, RTP915, generated whenever an audit is
performed over the Connection Map and a particular connection is
not found idle on the corresponding Media Blade. No action is
required.
• Connection Exceeds Long Idle Duration, RTP916, generated
whenever an audit is performed over the Connection Map and a
particular connection is found on the corresponding Media Blade
which exceeds the Long Idle Duration threshold. No action is
required.
• Connection Exceeds Long Call Duration, RTP917, generated
whenever an audit is performed over the Connection Map and a
particular connection is found on the corresponding Media Blade
which exceeds the Long Call Duration threshold. No action is
required.