Shut down the rtp media portal component – Nortel Networks NN10265-111 User Manual
Page 21
MCS 5100 RTP Media Portal Basics
21
Copyright © Nortel Networks Limited 2006
followed when updating a software load for the RTP Media Portal
component.
From the System Management Console
1
Shut down the RTP Media Portal component. For details, please
refer to
Shut down the RTP Media Portal component on page 21
.
2
Update the software load for the RTP Media Portal component.
For details, please refer to
Shut down the RTP Media Portal component
The following procedure describes how to shutdown the RTP Media
Portal component. To perform these procedures, the administrator must
login to the System Management Console. For detailed procedures on
logging into the System Management Console, please refer to MCS
5100 System Management Console User Guide (NN10273-111).
From the System Management Console
1
In the System tree, right-click on the RTP Media Portal
component.
2
From the pop-up menu, select the Shutdown command. You
can also launch the shutdown command by selecting Shutdown
from the pull-down Operations menu.