Nortel Networks NN10265-111 - Manual (Page 106)

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
106 Copyright © Nortel Networks Limited 2006
Memory Size Starting Address = 00000000?
Memory Size Ending Address = 04000000?
DRAM Speed in NANO Seconds = 8?
ROM Bank A Access Speed (ns) = 90?
ROM Bank B Access Speed (ns) = 120?
DRAM Parity Enable [On-Detection/Always/Never -
O/A/N] = O?
L2Cache Parity Enable [On-Detection/Always/Never -
O/A/N] = O?
PCI Interrupts Route Control Registers (PIRQ0/1/2/3)
= 0A0B0E0F?
Serial Startup Code Master Enable [Y/N] = N?
Serial Startup Code LF Enable [Y/N] = N?
Firmware Command Buffer Enable [Y/N] = N?
Firmware Command Buffer Delay = 5?
Firmware Command Buffer : <Enter>
['NULL' terminates entry]?
Update Non-Volatile RAM (Y/N)? y
Reset Local System (CPU) (Y/N)? n
8 At the prompt, type niot to access the Network boot settings.
PPC6-Bug>niot
Controller LUN =00? 13
Device LUN =00?
Node Control Memory Address =03E1D8A0?
Client IP Address =0.0.0.0? 192.168.<chassis #>.<slot #>
Server IP Address =0.0.0.0? 192.168.<chassis #>.<hostcard #>
Subnet IP Address Mask =255.255.255.0?
Broadcast IP Address=255.255.255.255? 192.168.<cage
#>.255
Gateway IP Address =0.0.0.0?
Boot File Name ("NULL" for None) =?
/tftpboot/bladeRunner
Argument File Name ("NULL" for None) =?
Boot File Load Address =001F0000?
Boot File Execution Address =001F0000?
Boot File Execution Delay =00000000? 00000005
Boot File Length =00000000?
Boot File Byte Offset =00000000?
BOOTP/RARP Request Retry =00? 50
TFTP/ARP Request Retry =00? 50
Hardware error retry attempts =00?
Trace Character Buffer Address =00000000?
BOOTP/RARP Request Control: Always/When-Needed
(A/W)=W?
BOOTP/RARP Reply Update Control: Yes/No (Y/N) =Y?
Update Non-Volatile RAM (Y/N)? y