Nortel Networks NN10265-111 - Manual (Page 77)

MCS 5100 RTP Media Portal Basics
77 Copyright © Nortel Networks Limited 2006
then type 3 and press Enter. Press Enter to accept the default
beginning block, and type +1000M and press Enter for the size.
Command (m for help):n
Command action
e extended
p primary partition (1-1)
p
Partition number (1-4): 3
First cylinder (6003-35242, default 1): <Enter>
Using default value 6003
Last cylinder or +size or +sizeM or +sizeK
(6003-35242, default 35242): +1000M
7 Change the partition type for the third partition. Type t and press
Enter, type 3 and press Enter, then type 82 and press Enter.
Command (m for help):t
Partition number (1-7): 3
Hex code (type L to list codes): 82
Changed system type of partition 3 to 82 (Linux swap)
8 Create the fourth partition. Type n and press Enter, type e and
press Enter, then type 4 and press Enter. Press Enter to accept
the default beginning block, then press Enter again to accept the
default for the last block.
Command (m for help):n
Command action
e extended
p primary partition (1-1)
e
Partition number (1-4): 4
First cylinder (7004-35242, default 7004): <Enter>
Using default value 7004
Last cylinder or +size or +sizeM or +sizeK
(7004-35242, default 35242): <Enter>
9 As the drive may only have four main partitions, the fourth
partition will hold partitions five through seven. Type n and press
Enter to create the fifth partition. Press Enter to accept the
default beginning block, then type +10000M and press Enter for
the size.
Command (m for help):n
First cylinder (7004-35242, default 7004): <Enter>
Using default value 7004
Last cylinder or +size or +sizeM or +sizeK
(7004-35242, default 35242): +10000M