Nortel Networks NN10265-111 - Manual (Page 41)

MCS 5100 RTP Media Portal Basics
41 Copyright © Nortel Networks Limited 2006
• Failed to Send Signal, RTP118, generated whenever an attempt to
dispatch an outgoing signal fails. No action is required.
• Failed to Reboot IO Exception, RTP919, generated whenever a
request for reboot of the system fails due to a software request for
said reboot. Report this log to your next level of support.
• No Blades Configured, RTP920, generated whenever the Media
Portal initiates in a state in which no Media Blade information has
been configured from the System Management Console. No action
is required.
• Unknown Proxy, RTP921, generated whenever a request for
service is made from an unknown proxy, one which is not datafilled
for this Media Portal. No action is required.
• Unable to Register with Proxy, RTP922, generated whenever an
attempt to send a registration message to a proxy fails. No action is
required.
• Host Interface Status File Problem, RTP923, generated during a
failed attempt to establish a file handle for the interface status file,
read from it, or it does not exist. Verify the host IP failover setting is
properly set from the System Management Console. Report this log
to your next level of support.
System logs
System logs are discussed in detail in MCS 5100 Fault Management:
Alarm and Log Reference (NN10385-900).