Nortel Networks NN10265-111 - Manual (Page 47)

MCS 5100 RTP Media Portal Basics
47 Copyright © Nortel Networks Limited 2006
a Right-click the root level RTP Media Portal component and
click Shutdown to shutdown and eventually lock the
component so configuration properties can be modified
.
Note: After completing the shutdown, the RTP Media
Portal component’s media resources are no longer
available for new sessions and its state is automatically
transitioned to LOCKED once all existing in-progress
sessions are released.
b Once the RTP Media Portal component is LOCKED,
right-click the root level RTP Media Portal component and
click Modify.
Figure 25 Modify RTP Media Portal configuration properties
c Modify the properties as required and click OK. For
information on the configuration properties, please refer to
Configuration tabs and properties on page 47 .
Configuration tabs and properties
The following figure shows the configurable properties of the System
Output Manager tab.