Nortel Networks NN10265-111 - Manual (Page 54)

NN10265-111 MCS 5100 3.5 Standard 4.0 January 2006
54 Copyright © Nortel Networks Limited 2006
Net1 Netmask Type: IP address
Range: N/A
Default:
255.255.255.0
(Used for the
Media Blades,
not for the host
card.)
The Net1 Netmask is the netmask
used for routing on the network
that is reachable by the NET1
interface on the media card. This
is only used in dual-network
configurations.
Net2 Netmask Type: IP address
Range: N/A
Default:
255.255.255.0
(Used for the
Media Blades,
not for the host
card.)
The Net2 Netmask is the netmask
used for routing on the network
that is reachable by the NET2
interface on the media card.
Default Gateway Type: IP Address
Range: N/A
Default: 0.0.0.0
(Used for the
Media Blades,
not for the host
card.)
The Default Gateway is the
gateway router to the rest of the
world (the default route).
Note: If this value is not
configured, the RTP Media Portal
will be unable to provide service.
The RTP Media Portal will only
provide service if the Media
Blades can communicate with the
specified Default Gateway.
Chassis # Type: String
Range: 0-255
Default: 1
Chassis identifier used to identify
a specific CPX8216T chassis.
This information is used by
configuration scripts to
synchronize RTP Media Portal
configuration across multiple
CX8216T chassis. Must be unique
per chassis. Must match the
Chassis # assigned to the Media
Blades during the staging of the
RTP Media Portal hardware.
Table 2 RTP Media Portal tab configurable properties (Sheet 4 of 8)
Configuration property Format Description
(Sheet 4 of 8)