Nortel Networks VT100 User Manual

Page 46

Advertising
background image

Getting started

3-7

Meridian IVR VT100 Gateway Development Guide Product release 2.0/I

heartbeat

You can specify an optional

heartbeat

action for the application specified by

app-nam

e. You can use this feature to send an indication to the host that a

session is still active. Some hosts log out sessions that remain idle for a period
of time. You can also use the heartbeat action to check connectivity, verifying
that the session remains on the appropriate screen. Typically, the

heartbeat

action contains a logout-action template which brings the session back to the
login screen if the connectivity with the mainframe fails. If you do not need
a heartbeat action, enter a hyphen for this action.

You specify the

heartbeat

in this format:

actiontemplate@n

, where n is the

number of seconds between each execution of the action template when the
session is idle.

The heartbeat action template uses the same syntax as the action templates
described earlier in this chapter, and usually only specifies a single screen
template. That screen template is usually the last screen specified in the
initial-action template. Typically, your screen template would only include a

key-descriptor

line, usually the

ENTER

key and

validation-tag

.

protocol

The protocol entry indicates the communications protocol being used by
app-name. This field is required and should be set to vt100.

Example “trs.conf” File

Consider the following example. Initial-action template files login.act and
signin.act have been defined and reside in the /u/ivr/3270 directory. There are
four applications which you want to access on the host computer:

accounting

, accesses the accounting software

market

, tracks stock market activity

banking

, retrieves credit balances

airline

, for purchasing tickets on a local commuter carrier

The application names shown here are not necessarily the actual names
assigned on the host computer, but they are the names assigned on the
application processor for the trs.conf file and all action templates that use
these applications.

Advertising