Figure 3-8 com.conf file – Nortel Networks VT100 User Manual
Page 50
Getting started
3-11
Meridian IVR VT100 Gateway Development Guide Product release 2.0/I
The
com.conf
file must be created if the baud rate is anything other than
9600. The
com.conf
file is located in the vt100 directory and a sample is
Figure 3-8
com.conf file
Creating the
com.conf
file allows you to adjust the following values.
IXON
IXON
allows you to stop host output by sending ASCII DC3, and restart host
output by sending ASCII DC1.
IXON
prevents input queue overflow.
IXOFF
IXOFF
requests that the host send start/stop characters when the input queue
is nearly empty or full.
IXOFF
prevents host input queue overflow.
IXON and IXOFF prevent queue overflow. If both are set and the host or
terminal sends more information than their respective queues can handle, the
communication port stops the data flow. When the queue gets down to a
manageable level, the communication port resumes the flow of information.
Meridian IVR