Nortel Networks VT100 - Manual (Page 82)

A-8 Host error messages
555-9001-316 Standard 1.0 February 1996
ERR: CH=xx illegal Command xxx
Meaning: TRS received an illegal command from another process.
Action to take: Contact your Nortel service representative.
ERR: Server Node file trs.node does not exist
Meaning: trs.node file was missing from the envoy process node.
Action to take: This error message happens in two cases. In the
envoy-server case, a TRS envoy cannot communicate with
a TRS server running on another node because the trs.node
file does not exist in the 3270 directory and the file does not
contain the node name where the TRS server is running. In
the other case, the TRS is running in a server mode and the
communication board is not downloaded correctly. The
TRS assumes that it is running in envoy mode and then
complains that the trs.node file does not exist. In this case,
make sure the communication board is downloaded
correctly.
ERR: The server node name is the same as envoy node name
Meaning: The server node defined in trs.node file is the same as the
node name on which the TRS envoy is running.
Action to take: Revise the trs.node file so that it contains the proper remote
TRS server node.
ERR: NET_TO_ENVOY: ERR: Reply Code =xx from SERVER
Meaning: The TRS envoy received an error message from the TRS
server.
Action to take: Contact your Nortel service representative.
ERR: Invalid Aid key specified use the Enter Key
Meaning: The Aid key specified in the screen template is not valid.
The system will use the ENTER key as the Aid key in this
case.
Action to take: Define a valid aid key.