Nortel Networks VT100 - Manual (Page 63)

4-4 IVR 2.0/I call flow interface
555-9001-316 Standard 1.0 February 1996
The following sections describe what you should enter in each area of the
parameter window.
COMI cell name
In order to make the cell easy to identify, includes the name of the action
template the cell calls out. The cell name shown in Figure 4-3 is “start
getbalance transaction.”
Call Audit Enabled
Determines if this cell logs the following information to the call audit
statistics file (audit_stat.d):
• Application Name
• Cell Name
• Cell Number
• Date and Time of Cell Execution
• Contents of the Cell Comment field
• Contents of the Call Audit Information buffer
The default setting is No.
Call Audit Information
When you enable Call Auditing, the Call Auditing process logs the contents
of this buffer to the audit_stat.d file. The default setting is DIGITS.
COMI action template
Enter the name of the action template, in quotes, and leave off the .act suffix.
Figure 4-3 shows “ getbalanc e” as the entered name.
COMI cell more input
If you need to send more than 10 input buffers to the host computer, click the
button in front of “Yes”; if you are sending 10 or less input buffers, click the
button in front of “No.” If you specify “Yes,” place additional COMI cells
on the drawing board until you have enough input buffers. Connect the
Success branch of the first COMI cell to the Input branch of the following
COMI cell. Connect the rest of the COMI cells in this fashion. The final
COMI cell should have the “No” button selected for the “More Input?”
parameter.