Nortel Networks VT100 - Manual (Page 68)

IVR 2.0/I call flow interface 4-9
Meridian IVR VT100 Gateway Development Guide Product release 2.0/I
Note: You must enter the output buffers in the same order they will be used
by the TRS process.
If your application uses more than 10 output buffers, string COMO cells
together until you have enough buffers. Connect the input branch of each
subsequent COMO cells to the “MORE DATA” branch of the previous
COMO cell.
COMO cell branches
As shown in Figure 4-5 on page 4-9, the COMO cell has several branches.
Figure 4-5
COMO cell
Table 4-1 describes each branch of the COMO cell.l
Table 4-1
Branches of the COMO cell
Branch Reason the branch would be taken
ERROR Any problem with any part the host transaction will
cause the application to take the error branch.
TIMEOUT The transaction took more than its allowed time as
specified in the COMI cell.
NOT READY The transaction did not complete and Blocking was
set to “No”
END OF DATA The transaction successfully completed