NCR S16 - Manual (Page 24)

Configuring the SCSI Adapters
3-4 Confirming the SCSI Adapter Settings
Send Start Unit Command Yes
5. Press Esc to return to previous menu.
6. Select Advanced Configuration Options and set the parameters as follows:
Host Adapter BIOS (Config Util...) Enabled
Support Removable Disks... Boot Only
** Extended BIOS Translation... Enabled
Display <CTRL-A> Message During BIOS Initialization... Enabled
Multiple LUN Support Disabled
BIOS Support for Bootable CD-ROM Disabled
BIOS Support for Int 13 Extensions Enabled
*** Support for Ultra SCSI Speed Disabled
7. Press Esc to return to previous menu.
8. Press Esc until prompted to save configuration. Save the configuration
and the system reboots.
**Extended BIOS Translation should be disabled, and the drive should be
reformatted when using SCO Unix or SCO UnixWare. After changing
settings, reboot the system before formatting.
***Enable for use with Ultra drives only.