NCR S16 - Manual (Page 33)

Performing a Full Installation of Windows NT Server 3.51
NCR S16 Minitower Server Installing Network Operating System 4-9
You may also select to enter the IP addresses of your primary and
secondary WINS server. When you have finished, select OK.
4. If you do not fill in a WINS address in the preceding screen, you will get a
message such as the one below. If you see such a message, select YES to
continue.
At least one of the adapter cards has an empty Primary
WINS address.
5. Installation of the network components continues. If you indicated earlier
that you want this system to be a Domain Controller, you are asked to
decide if this system is to be a Primary Domain Controller or a Backup
Domain Controller.
In either case, you need to complete the domain name.
Note: Do not include spaces or backward slashes in the domain name.
When you have finished, select OK.
If you previously indicated that you want this system to be a Server, you
are prompted to indicate the name of the domain or workgroup this system
will join.
Providing Additional Setup Information
Continue the installation by providing the following information:
1. The installation process sets up program groups and icons for your
system. You are prompted to enter the name and password for your
Administrator. You need to enter the password twice. When you have
finished, select CONTINUE. If the password is left blank, you are
prompted to confirm.
2. You are prompted to enter the name and password for your initial user.
You need to enter the password twice. When you have finished, select
CONTINUE. If the password is left blank, you are prompted to confirm
that No Password is what you want.
3. You are prompted to choose virtual memory settings. Select the
recommended size and select CONTINUE.