NCR S16 - Manual (Page 61)

Loading the Controller’s Drivers
NCR S16 Minitower Server Installing Network Operating System 7-7
Note: You may also install NetWare from CD-ROM by using the .DSK
drivers and mounting the CD as a NetWare volume.
If using the CD-ROM drive only to install NetWare, we recommend using
the DOS-level drivers. If you plan to use the CD-ROM as a volume later
in your network, you may load those different NetWare drivers at that
time.
Loading the CD-ROM as a NetWare Volume
To load the CD-ROM as a NetWare Volume, follow these steps:
1. If loading multiple AIC-7870.DSU drivers, load ASPICD directly after
the .DSU slot load (LOAD AIC 7870 Slot=X) for the HBA slot
controlling the CD-ROM.
2. To load the CD-ROM as a NetWare Volume, at the server system prompt
{:}, type the following:
:LOAD AIC7870 Slot=32
:LOAD AIC7870 Slot=33
:LOAD ASPICD
:LOAD CDROM
:CD MOUNT volumename