Non-pre-load installation – NCR S16 User Manual
Page 42
Advertising
Non-Pre-Load Installation
5-6
Installing Microsoft Windows NT Server 4.0
Non-Pre-Load Installation
If Windows NT Server was not pre-loaded on your server at the factory, use
this section to prepare your system and install the software.
To install Windows NT Server 4.0 on your server, follow these steps:
•
Confirm the CMOS settings using BIOS Setup - See Chapter 2
•
Confirm the adapter settings using the Adaptec BIOS SCSISelect Utility -
See Chapter 3
•
Install Windows NT Server
Advertising