Net2Phone Max 430 - Manual (Page 11)

Max 410/420/430 User’s Guide – Chapter 1
3
Account Balance Announcement by Port –
The Max 410, 420, and 430 have a Web
configurable toggle switch that enables the IVR
to announce the account balance or minutes
remaining on the port that the call is going
over.
Greeting Message - A greeting message will
play prior to the dialed call being sent to the
call servers.
New Password Functionality - When a user
selects Password mode or Acc/Pin/Password
mode and the password field is empty, an error
message is displayed and the password value
is not saved in flash memory.
Call Detail Record (CDR) Generation –
Administrators can select to have CDRs
generated and sent to the Max Automated
Billing System (ABS).
TX/RX Silence Detection – The Max 410,
420, and 430 detects both TX/RX silence on an
FXO port and then disconnects the call based
on the duration of call silence.
Multiple Frames per Packet Support - The
Max 410, 420, and 430 supports multiple
frames per packet on the G.732 codec.
Upgraded Vocfiles – Updated vocfile included
with software upgrade.
New Features and Functionality
Version 1.5.30 provides the following new features:
T.38 Fax Protocol Supported – This version
features enhanced functionality of the industry
standard T.38 fax protocol, including automatic
fax detection, built-in redundancy, and higher
success rates.
IMPORTANT: Before upgrading to version
1.5.30 to take advantage of the enhanced
T.38 functionality, please refer to the
Upgrading the System Software section on
page 65 in this Guide.