Net2Phone Max 430 - Manual (Page 80)

Max 410/420/430 User’s Guide – Chapter 6
72
your call may be automatically forwarded to
another number (without any notification to
you).
NOTE:
• If the LAN to which either Max is
connected employs a firewall, you
need to configure settings on both
the Max unit and the firewall before
you can place Max-to-Max calls. For
information about configuring a
firewall, refer to Configuring Firewalls
on page 32 in this Guide.
• In Max-to-Max calling, the receiving
port’s Account Information table
settings must be configured to permit
it to receive calls. For details, refer to
Receiving Max-to-Max Calls on page
45 in this Guide.
• Refer to your Reseller for information
about ’s Max-to-Max calling rates.