Net2Phone Max 430 - Manual (Page 70)

Max 410/420/430 User’s Guide – Chapter 5
62
Country Code – The access number you dial
when placing a call from another country. For
example, in the US, the country code is 1.
Area Code (city code) – The access number
for the area or city in which you live. For
example, in Newark, New Jersey (US), the
area code is 973. You can also indicate how
the area codes are to be used:
YES Without a Leading Zero – select this
for countries that use area codes
beginning with numbers other than zero;
for example, the US does not use leading
zeros, so this setting would apply.
With a Leading Zero – select this for
countries that use area codes beginning
with zero.
Area Codes Not Required – select this
for countries in which area codes are not
required; for example, small countries may
have only one area code.
International Call Prefix No. – The prefix you
dial when placing international calls. For
example, in the US, the international prefix
number is 011. (Only a single entry is allowed).
Long Distance Call Prefix No. – The access
number you dial when placing a long distance
call. For example, in the US, the long distance
prefix is 1.
Cell Phone Prefix No. – The access number
you dial when placing a call to a cell phone, if
applicable. You can separate up to 10 multiple
entries by using a comma (,).
After entering this information, you must reset the Max
410, 420, or 430 to apply the modified values.
The N2P call is made based on the local dialing system
setup environment. All the prefix numbers are
automatically added to the actual dialed numbers.
For example, if the user placed a call to a local phone
number, the N2P call is made by the Max 410, 420, or 430
with the international call access number, country code