Net2Phone Max 430 User Manual
Page 19
Max 410/420/430 User’s Guide – Chapter 2
11
for proper air circulation. Do not place objects in
excess of 20 pounds on top of the unit.
IMPORTANT: Please refer to the Max
410/420/430 Hardware Installation Guide
and observe the safety precautions listed.
2. Connect an analog telephone to any one of the
FXS ports. (Max-420).
NOTE: For the Max 410, initial LAN
configuration is done via a PC connected
to the Max through its serial port, using the
HyperTerminal terminal emulator
application (or equivalent), which is
included with all Microsoft™ operating
systems. This procedure is explained in
Using the HyperTerminal Emulation
Program on page 18 in this Guide.
3. Connect the RJ-45 LAN port to a hub or switch.
4. Connect your FXS and/or FXO ports to your PBX
as per the illustrations in Figures 2, 3, and 4,
below.