Net2Phone Max 430 - Manual (Page 55)

Max 410/420/430 User’s Guide – Chapter 5
47
NOTE: The two VoIP entries in the Current
Routing Table cannot be deleted, as they
are necessary for correct operation of the
Max 410/420/430 system.
After the desired changes have been entered, click the
Save button to save them. The unit must then be rebooted
as described in Restart System on page 53 to activate
the new settings.
Integrated Voice Response (IVR)
Configuration
This section describes the remote IVR and Max-to-Max
IVR configuration methods.
Remote IVR Configuration
The remote access IVR and Max-to-Max IVR supports
multiple passwords. You can enter up to ten (10) different
passwords, up to five digits each. When entering multiple
passwords, separate each password with a comma (,).
Remote access IVR is supported for FXS/FXO ports, and
Max-to-Max IVR is supported for FXO ports. For FXS
IVR, user must add the IVR access number to the routing
table for IVR access. The IVR access number can be
generated by adding an entry in the routing table with the
IVR interface type.
REMINDER: A separate port with its own
telephone line connection to the PBX or to
an analog telephone is required for each
concurrent telephone call desired. For
example if capability for 3 concurrent calls
is desired then the Max must have at least
3 ports each connected to the PBX or to an
analog telephone.