Net2Phone Max 430 - Manual (Page 69)

Max 410/420/430 User’s Guide – Chapter 5
61
1. In the Port Class Setting table, enter the port
number to which you would like to assign a class.
2. In the Class drop-down menu, select the class
you would like to assign to the specified port.
3. Click the OK button to save the class
assignment.
The class appears in the row corresponding to
the port you defined.
Local Dialing System
The local dialing system feature enables users to dial
phone numbers on the Max 410, 420, and 430 products as
they normally do on their ordinary phones. That is, users
do not have to dial an international call access number
and country code number if the call destination is the
same country where user lives. Similarly, the area code
can be omitted for calls made to the same area. Users
can configure a dialing pattern on the Max 410, 420, and
430 that is as close as possible to the host country's
dialing pattern.
Figure 27 – Local Dialing System Page
On the Local Dialing System page, enter the following
information to ensure that calls are routed correctly: