Net2Phone Max 430 - Manual (Page 76)

Max 410/420/430 User’s Guide – Chapter 5
68
2. Click the Load button.
3. Reboot the device.
4. In the Web Manager, re-enter any settings that you
may have modified from the original default
configuration based on the configuration settings that
you printed out before the upgrade.
NOTE: If you encounter problems with the
Max after upgrading, Net2Phone
recommends that you reset the factory
defaults and re-enter your settings.
Help with your Max 410/420/430
Click the Help link (shown below in Figure 32) to directly
connect with the Net2Phone Partner Support website.
From this site you can access FAQs, product
documentation, and the latest software downloads for your
Max product.
Figure 33 – Help Page