Net2Phone Max 430 - Manual (Page 12)

Max 410/420/430 User’s Guide – Chapter 1
4
Inbound Allow List – The Inbound Allow List
feature for FXO ports allows the user to specify
the allowable inbound numbers that can make
use of the port for outbound calls.
Class of Service – The new Class of Service
feature sets the call authorization classes for
restricting outbound calls. Users cannot make
a call to the restricted numbers that are in both
his/her own class and a higher class.
Local Dialing System – This version features
the addition of the Local Dialing System, which
enables users to dial phone numbers on the
Max 410, 420, and 430 products as they
normally do on their ordinary phones. That is,
users do not have to dial an international call
access number and country code number if the
call destination is the same country where user
lives. Similarly, the area code can be omitted
for calls made to the same area. Users can
configure a dialing pattern on the Max 410,
420, or 430 that is as close as possible to the
host country's dialing pattern.
FTP Block – The FTP Block feature enables
the Max to block an FTP connection. For
example, if you want to upgrade the Max via
FTP, you must start the FTP server daemon in
the Max unit. This is an important security
measure to help block unwanted connections.
HTTP Port Change – This version includes a
feature that allows the HTTP port number to be
changed from the standard port 80 using
HyperTerminal and telnet. Changing the port
number to a number other than 80 increases
the security for users accessing the Web
Manager.
If you have an older version of the Max 410, 420, or 430
software, and you want to take advantage of these new
features, you can download the software from:
http://web..com/partnersupport/ devicesoftware/