NEC NEAX IPS NWA-008869-001 - Manual (Page 106)

CHAPTER 4 INITIALIZATION
– 96 – NWA-008869-001 Rev.1.0
atch4001.fm
SETTING THE DATE AND TIME
The In-Skin Router has a built-in calendar clock with battery backup. Set the difference from the interna-
tional standard time and the current date and time in U.S.A.
To set the time difference, use the timezone command in global config mode. As the parameter to the tim-
ezone command, a time difference can be set in the range from -12 to 12.
To set the date and time, use the clock command. As the parameters to the clock command, you can enter
the hour (0-23), minute (0-59), and second (0-59), day (1-31), month (1-12), and year (2001-2098) in this
order, delimiting each with a space. To check the date and time, use the show clock command.
Setting
In this example, the In-Skin Router is placed in global config mode, the difference from the international
standard time “-5” is set, and 3:12:0 p.m., October 20, 2001 is set as the date and time in U.S.A. Enter the
clock command in accordance with a time signal or an accurate clock.
MEMO 1: By default, the difference from the international standard time is set to “+9”. Set the time dif-
ference from the international standard time in your country.
MEMO 2: To enter the time only, you can enter the hour, minute, and second only, omitting the day,
month, and year.
Checking
For checking, use the show clock command.
Router # enable
− config
Router (config) # timezone -5
Router (config) # clock 15 12 0 20 10 2001
Router (config) #
Enter
Enter
Enter
Router (config) # show clock
Saturday, 20 October 2001 15 : 12 : 07 - 05.00
Router (config) #
Enter
SETTING THE DATE AND TIME