NEC NEAX IPS NWA-008869-001 - Manual (Page 64)

CHAPTER 2 INSTALLATION
– 54 – NWA-008869-001 Rev.1.0
atch2001.fm
Mounting PZ-M649 Card/PZ-M650 Card/PZ-M623 Card
(1) Before mounting PZ-M649 card/PZ-M650 card/PZ-M623 card, set the
switches of the PN-RTA card and PZ-M649 card/PZ-M650 card to the
appropriate position.
(2) Mount the PZ-M649 card/PZ-M650 card/PZ-M623 card on the PN-RTA card.
STEP1: Take off four screws from the rear side of PZ-M649 card/PZ-M650 card/
PZ-M632 card support.
NOTE: Supports and screws are attached to the PZ-M649 card/PZ-M650 card/PZ-M632 card.
STEP2: Connect the CONN connector on the PZ-M649 card/PZ-M650 card/PZ-M632 card and the
SUBCONN connector on the PN-RTA card.
STEP3: Secure the PZ-M649 card/PZ-M650 card/PZ-M632 card to the PN-RTA card with four screws
which have been taken off by STEP1.
NOTE: Only one PZ-M649 card, or one PZ-M650 card, or one PZ-M623 card can be mounted to one
PN-RTA card.
Taking off Screws
Mounting PZ-M649 Card/PZ-M650 Card/PZ-M623 Card on PN-RTA Card
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Support
PZ-M649 Card/PZ-M650 Card/
PZ-M623 Card
CONN Connector of
PZ-M649 Card/
PZ-M650 Card/
PZ-M623 Card
PN-RTA Card
PZ-M649 Card/PZ-M650 Card/
PZ-M623 Card
SUBCONN Connector
on PN-RTA Card
INSTALLATION PROCEDURE