NEC NEAX IPS NWA-008869-001 - Manual (Page 25)

CHAPTER 2 INSTALLATION
– 15 – NWA-008869-001 Rev.1.0
atch2001.fm
Static Electricity Guard
• WHEN MAKING A SWITCH SETTING ON A CIRCUIT CARD
• WHEN CARRYING A CIRCUIT CARD
The mark shown below is attached to the sheet for the work in which circuit cards are handled. When en-
gaging in such work, the installer must be careful not to cause damage by static electricity.
WEAR A WRIST STRAP AND PERFORM
THE WORK ON A GROUNDED
CONDUCTIVE WORK SURFACE.
CIRCUIT
CARD
WHEN CARRYING A CIRCUIT
CARD AROUND, KEEP THE
CARD IN A CONDUCTIVE
POLYETHYLENE BAG.
CIRCUIT
CARD
CONDUCTIVE
POLYETHYLENE
BAG
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
PRECAUTIONS