NEC NEAX IPS NWA-008869-001 - Manual (Page 172)

CHAPTER 7 TROUBLESHOOTING
– 162 – NWA-008869-001 Rev.1.0
atch7001.fm
Recovery procedure
This example assumes that the In-Skin Router is connected as described below.
• The IP address of the LAN1 (10/100BASE-TX) port of the In-Skin Router is “192.168.3.100/24”.
• A TFTP server with the address “192.163.3.5” is connected to the LAN1 port of the In-Skin Router.
• The program file ix1000-ms-4.0.5.ldc of the In-Skin Router is prepared on the TFTP server.
LAN2
LAN1
CONSOLE 192.168.3.100
(TFTP server)
192.168.3.5
Network
Router
Local console
Terminal
192.168.3.0/24
LAN1=10/100BASE-TX (FastEthernet)
LAN2=10BASE-T (Ethernet)
Program file
ix1000-ms-4.0.5.ldc
In-Skin Router
2000 IPS
IF THE IN-SKIN ROUTER DOES NOT START