Digital private line network example (e1), Chapter 5 examples of setup on networks – NEC NEAX IPS NWA-008869-001 User Manual

Page 140

Advertising
background image

CHAPTER 5 EXAMPLES OF SETUP ON NETWORKS

– 130 –

NWA-008869-001 Rev.1.0

atch5001.fm

DIGITAL PRIVATE LINE NETWORK EXAMPLE (E1)

This section explains an example of establishing an inter-LAN connection with a private line (E1), using
the digital private line (E1) interface of the In-Skin Router (PZ-M650 is required).
In this example, networks A and B are connected together with a digital private line, using two In-Skin
Routers. In the example shown in the figure, external CSUs are used. If the built-in CSUs of the In-Skin
Routers are used, the same setup procedure can be used.
The setup includes the following operations:

• Setting the digital private line (E1)
• Setting an IP address to the serial interface
• Setting the route
• Setting DTI card

LAN1

192.168.1.1

Network B

Router A

Terminal B

192.168.2.2

Terminal A

192.168.1.2

WAN (E1)

CSU

192.168.2.0/24

E1 digital
private line
(carrier)

192.168.2.1

Network A

192.168.1.0/24

2000 IPS

Station

Station A

192.168.1.3

Station B

192.168.2.3

Station

In-Skin Router

DTI

Card

LC/

DLC

Card

LAN1

Router B

WAN (E1)

CSU

2000 IPS

In-Skin Router

DTI

Card

LC/

DLC

Card

DIGITAL PRIVATE LINE NETWORK EXAMPLE (E1)

Advertising