Customizing your telephone, Displays – Nortel Networks P0857846 User Manual
Page 108
P0857846 Issue 02
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Customizing your telephone
Finding out what a button does using Button
Inquiry
You can check the function of any line, intercom, or programmed
button on your Norstar telephone by pressing
ƒ•‚
. On
the M7100 telephone Button Inquiry shows your internal number
followed by the function assigned to your single memory button.
Displays
Making the display darker or lighter using
Contrast adjustment
•
Press
ƒ•‡
.
•
Press a number on the dial pad to choose the contrast level you
like best.
On a two-line telephone, you can also use the
UP
and
DOWN
display
buttons to adjust the contrast.
The display shows the number and name of
the line. Press
SHOW
to view the redirection
status of the line.
Press
£
or press
VIEW‚
or
·VIEW
t
o view a
number that is too long to fit on the display.
Press
˙
or
OK
when you are done.
The display shows the directory number of
the telephone, and the assigned name.
Press
NEXT
to see the first line assigned to
ring at the intercom button.
The name of the feature assigned to a button
is displayed when you press the button.
Press
£
or
SHOW
for additional information.
Press the button you want to check. Press
ƒ
or
EXIT
when you are finished.
For other displays, see “Common feature displays” on page 149.
ƒ•‚
ƒ•‡