Nortel Networks P0857846 - Manual (Page 110)

Customizing your telephone / 97
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
The following feature codes cannot be programmed onto a memory
button: Long Tones and any code beginning with
• except
ƒ•fi‚⁄ (Language Choice) and ƒ•‡
(Contrast Adjustment).
Erasing a feature button
• Press ƒ•⁄ .
• Press the feature button.
• Press ˙ or OK to erase the button.
Displays
Tip - When you program a button with the line
pool feature code, you must enter a line pool
access code after the feature code. The
programmed line pool button accesses a specific
line pool, not the line pool feature.
The name of the feature assigned to a button
is displayed when you press the button.
SHOW
appears when there is more information
available. Press
£
or SHOW for additional
information.
If you are checking a speed dial button, enter
the two-digit speed dial code that you want to
check.
Enter the feature code, or press ® or QUIT
to quit programming or CLEAR to clear the
numbers you have entered. The system
accepts the entry as soon as you enter a
valid feature code.
Press ƒ and enter the feature code
you want to assign to the button. You cannot
enter invalid codes.
You have programmed a button with a
feature that was already programmed onto
another button. The feature has moved to
the button you just programmed. Its original
button is now blank.