Nortel Networks P0857846 - Manual (Page 68)

P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Time savers for making calls
Storing a number on a memory button for
Autodial
You can program memory buttons for one-touch dialing of internal
or external telephone numbers.
Buttons used for lines, incoming line groups, answer or Handsfree/
Mute cannot be used as autodial buttons.
If the power to your Norstar system is off for more than three days,
autodial numbers (as well as some other system programming) may
be lost from the memory.
Adding an autodial button
or
• Press ƒ•⁄ to program an external number or
ƒ•¤ for an internal number. Choose a button and
then enter the number as if you were dialing it.
When programming Autodial you can use:
• Last Number Redial
• Saved Number Redial
• destination codes (choose ∆ as the line)
• host system signalling
Choosing a line for Autodial
To include a line selection for an external number, press the line or
intercom button before you enter the number. To select a line pool,
press a programmed line pool button, or press
∆ and enter
a line pool access code.
ƒ•⁄ ƒ•¤