Nortel Networks P0857846 - Manual (Page 60)

Making calls / 47
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Wait for the telephone to be answered. If no
one answers, press
LATER to use the Ring
Again (page 52) or Message (page 82)
feature, or press
PRIORITY to make a priority
call.
You cannot use Ring Again on your current
call. You can only use Ring Again while you
have a busy signal on an internal call or line
pool request or while an internal call is
ringing.
The telephone you are calling has Do Not
Disturb turned on. Press
LATER to use the
Ring Again or Messages features, or press
PRIORITY to make a priority call.
You have dialed a number, but the least
expensive route that the system is
programmed to use is busy. Unless you
release the call, it will go through on a more
expensive route.
The last number you dialed or the number
you saved for Saved Number Redial was a
speed dial number that displayed a name
rather than the number. The number will be
dialed correctly, but you cannot see it.
You have attempted to use someone else's
private line.
Enter the digits of the number you want to
dial.
You have not dialed an external telephone
number since the last power interruption or
system reset.
Either you have no prime line or your prime
line is busy. Select a line manually before
dialing.
You have entered the number of a telephone
that is not in service.
The telephone you have called is on another
call. Press
LATER to use the Ring Again or
Message features.