Nortel Networks P0857846 - Manual (Page 137)

124 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Services that have been turned on automatically are indicated by an
asterisk (*) before the name on the display. You can neither
manually activate nor cancel scheduled services, although you can
override them by manually turning on another schedule.
The control telephone can override Services that are turned on and
off according to a schedule at any time by entering a Services
feature code, and selecting a different schedule. This override
remains in effect until it is canceled. If you select a schedule with an
asterisk (*), the next automatic service schedule comes into effect at
the programmed time.
Direct-dial calls to a direct-dial telephone ring at the extra-dial
telephone (the extra-dial telephone is designated by your installer or
customer service representative) only when you enter the Ringing
service feature code (
ƒ°‡⁄ ) at that direct-dial
telephone. Note that only the extra-dial telephone is activated, not
the actual Ringing service (unless that direct-dial telephone is also
a control telephone).
Using passwords
Your passwords prevent unauthorized or unintentional changes to
your Norstar system. To keep your telephone service secure,
distribute the password only to selected personnel or make use of
the basic password described below. Record your password in a
secure place and change it periodically.
You have entered the Show Services feature
code and there is no active Service.
There is a Service active in your system.
Press
•
or LIST to view the active
Services.
For other displays, see “Common feature displays” on page 149.
Tip - Norstar provides six service schedules
named Night, Lunch, Evening, Sched 4, Sched 5,
and Sched 6. Your installer or customer service
representative can change these names to suit
your business.