Testing the telephone headset, Testing the telephone speaker, Testing the power supply to a telephone – Nortel Networks P0857846 User Manual

Page 160

Advertising
background image

Troubleshooting / 147

P0857846 Issue 02

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

Pressing any button or hanging up ends the test.

Testing the telephone headset

The headset test is not available to telephones that do not have a
headset jack or a headset plugged in.

Press

ƒ°‚fi

, then

£

or

NEXT

until the display

shows

Headset test

.

Press

TEST

or

˙

to go ahead with a headset test.

You should hear dial tone through the headset. The volume will be
reset to a default level during the test.

Pressing any button ends the test.

Testing the telephone speaker

Press

ƒ°‚fi

, then

£

or

NEXT

until the display

shows

Speaker test

.

Press

TEST

or

˙

to go ahead with a speaker test.

You should hear page tone through the telephone speaker at the
maximum volume. The volume returns to its previous setting when
you end the test.

Pressing any button ends the test.

Testing the power supply to a telephone

Press

ƒ°‚fi

, then

£

or

NEXT

until the display

shows

Power test

.

Press

TEST

or

˙

to go ahead with a power supply test.

You should see all the indicators on the telephone go on and hear
ringing at maximum volume. When the test has ended, the display
should briefly show

Power OK

.

The test lasts for five seconds or until you press a button.

Advertising