Making changes to call forward on busy, Begin the programming session, Change where a call goes when a telephone is busy – Nortel Networks P0857846 User Manual
Page 37: Making changes to call forward on busy 24
24 / Frequently used programming operations
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
P0857846 Issue 02
Making changes to Call Forward on Busy
Begin the programming session
Change where a call goes when a telephone is busy
Press
ƒ
.
Press
••¤flfl‹››
.
Press
¤‹fl›fl
.
Press
≠
.
Enter the internal number (intercom
number) of the telephone extension. In
this example, it’s 225.
If the set has been given a name, it will appear on the display.
Press
≠
.
Press
≠
.
Press
‘
.
Press
≠
.
Press
CHANGE
and enter the internal
number where you want the calls to be
sent. In this example, it’s 221.
You can press
CLR
to change the destination back to
None
.
Press
®
to end your session.
You can also press
‘
to continue programming capabilities for
this telephone, or press
–
three times to return to the
Terminals and Sets heading.