Nortel Networks P0857846 User Manual

Page 164

Advertising
background image

Common feature displays / 151

P0857846 Issue 02

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

You have used the Call Queuing feature
without picking up the receiver. Auto
Handsfree has not been assigned to your
telephone. You must use the receiver or

©

to answer a call.

You are receiving a priority call. If you are on
another call, inform the person you are
speaking to that you are about to put the call
on hold. Press the flashing line indicator of
the priority call or wait until the call connects
automatically (in eight seconds). The priority
call goes through when you hear the next
beep. Your active call is placed on Exclusive
Hold. It is reconnected automatically when
the priority call ends (unless you transfer the
priority call, in which case you must press the
line button of your original call to reconnect).
Use DND (

ƒ°fi

) or press

BLOCK

to reject a priority call.

You have no free line buttons on which to
receive a call. Release one of your current
calls and try again to answer the incoming
call.

You have received a Ring Again offer for a
line pool. Press

the flashing internal line

button or

YES

to use the line pool. On the

M7100 telephone, just lift the receiver.
Otherwise, press

NO

or wait 30 seconds for

the Ring Again offer to expire.

You cannot program a feature button while
you are on a call.

You have tried to use a feature while you
were on a call or had calls on hold. Release
the call or calls, before using the feature.

The line is in use. Make the call using normal
methods or wait until the line is free.

You have tried to make, receive or pick up a
call when no line button was available. Some
features also require you to have a button
free. Releasing calls can free up line buttons.

Advertising