Nortel Networks P0857846 - Manual (Page 87)

74 / Forwarding your calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Displays
Line Redirection
Line Redirection lets you send your external calls to a telephone
outside the office. You may choose to redirect all your external lines
or only some of them.
You cannot use the Line Redirection feature on either an M7100
telephone or a telephone connected to an ATA.
Turning on Line Redirection
• Press ƒ°› .
• Select the outgoing line to be used for redirected calls.
• Enter the number to which calls will be redirected (the ways you
can do this are listed below).
• Select the lines to be redirected.
Enter the telephone number to which you wish to redirect calls,
using one of the following methods:
• Press an external autodial button.
• Enter an external telephone number (using no more than 24
digits) then press
˙ or OK .
• Press ˙ or OK if the line you have chosen as the
outgoing line is a private network line that does not require you
to dial digits.
There are several reasons why you may get
this message. For instance, you cannot
forward your calls to a telephone that has
been forwarded to your telephone.
Your calls are being forwarded to telephone
221.
Two or more telephones are linked in a
forwarding chain, and one of them is out of
service or is being used for programming.
For other displays, see “Common feature displays” on page 149.
ƒ°›