Disconnecting one party, Independently holding two calls, Putting a conference on hold – Nortel Networks P0857846 User Manual

Page 51

Advertising
background image

38 / Answering calls

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

Disconnecting one party

You can disconnect one party from a conference and continue
talking to the other.

On an M7208, M7310 or M7324 telephone:

Press the line button of the call that you want to disconnect. The
call that you want to keep is automatically put on hold.

Press

®

. The call is disconnected.

Press the line button of the held call to speak to the remaining
person.

On an M7100 telephone:

Press

ƒ£‹

, to place one caller on hold. Press

˙

again, to put the caller you want to keep on hold.

Press

®

. The call is disconnected.

Press

˙

to speak to the remaining party.

Independently holding two calls

For all Norstar telephones except the M7100 telephone, you can put
the two people in a conference call on hold independently so that
they cannot talk to each other.

Press the line button of one person. The other person is
automatically put on hold.

Press

˙

. The second person is put on hold.

You can re-establish the conference.

Take one call off hold.

Press

ƒ‹

.

Take the other call off hold.

Putting a conference on hold

You can put a conference on hold, allowing the other two people to
continue speaking to each other by pressing

˙

.

You can reconnect to the conference by pressing either of the held
line buttons. For the M7100 telephone, press

˙

.

Advertising