Long tones, Displays, Programmed release – Nortel Networks P0857846 User Manual

Page 146: Run/stop

Advertising
background image

Using System features / 133

P0857846 Issue 02

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

Long Tones

The Long Tones feature lets you control the length of a tone so that
you can signal devices such as fax or answering machines which
require tones longer than the standard 120 milliseconds.

While on a call, press

ƒ°‚°

.

Press the dial pad buttons to produce the appropriate tones.
Each tone sounds for as long as you hold down the button.

Long tones can be used on any call except a conference call. You
can use internal lines of the Norstar system to activate a device
connected to an analog terminal adapter (ATA) in another area of
your office, or external lines to access devices outside the Norstar
system.

Displays

Programmed Release

The Programmed Release feature performs same function as

®

in

a programmed dialing sequence. When the system encounters
Programmed Release in a dialing sequence, it stops dialing and
hangs up the call.

The Programmed Release symbol (

fi

) takes up two of the 24

spaces in a programmed dialing sequence.

The system will ignore any digits or commands that follow a
Programmed Release in a programmed dialing sequence.

Run/Stop

Run/Stop inserts a break point into a sequence of dialed numbers or
characters used for automatic dialing. This may be necessary when
you are connecting to a PBX or similar host system.

At the appropriate time, press any dial pad
button. Hold each button down for as long as
necessary. Press

ƒ

or

˙

to cancel Long Tones.

ƒ°‚°

ƒ•°·

ƒ•·

Advertising