Nortel Networks P0857846 - Manual (Page 145)

132 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Preventing a telephone from using Link
Link can be restricted at individual telephones.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
• Press ƒ••¤flfl‹›› .
• Press ¤‹fl›fl (the default System Coordinator
password).
• Press ≠ and enter the internal number of the telephone
you wish to program.
• Press ≠ .
• Press ‘ three times. The display shows Restrictions .
• Press ≠ twice.
• Press ‘ three times. The display shows Allow link: .
• Press CHANGE to choose Y (Yes) or N (No).
Pause
The Pause feature enters a 1.5 second delay in a dialing sequence
on an external line. This is often required for signaling remote
devices, such as answering machines, or when reaching through to
PBX features or host systems.
You can program more than one pause in an external autodial or
speed dial sequence.
The Pause symbol ( › ) uses one of the 24 spaces in a dialing
sequence.
For pulse dialing, • inserts a 1.5 second pause into the dialing
sequence.
Tip - If your Norstar system is connected to a
private branch exchange (PBX), program Link onto
a memory button for one-touch access.
ƒ‡°