Changing your class of service, Displays – Nortel Networks P0857846 User Manual

Page 151

Advertising
background image

138 / Using System features

Norstar-PLUS Modular ICS 2.0 System Coordinator Guide

P0857846 Issue 02

restriction filters and remote package associated with their Class of
Service password apply, rather than the normal restriction filters and
remote package. COS passwords are programmed by either your
customer service representative or installer.

Users should memorize their COS passwords instead of writing
them down. Employees' COS passwords should be deleted when
they leave the company. Typically, each user has a separate
password. Several users can share a password or one user can
have several passwords.

Changing your Class of Service

You must enter a Class of Service password each time you wish to
make a call that is normally restricted on a line or telephone.

To change the restriction filters on a line or telephone:

Press

ƒfl°

.

Enter your six-digit COS password.

COS passwords lets you define individual passwords and determine
the restriction filters, and remote package associated with each.

Displays

Tip -

If you use your Norstar system from outside

the office, you may have to enter a Class of Service
password to gain access to the system. See “Using
your Norstar system from an external location” on
page 135.

(Blank display) Enter your password. It will
not be shown on the display.

You have entered a password that is not
programmed into your system.

ƒfl°

Advertising