Dhcp configuration of tcp/ip in windows 2000 – NETGEAR ME103 User Manual

Page 105

background image

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

Preparing Your PCs for Network Access


August 2003

DHCP Configuration of TCP/IP in Windows 2000

After you install a network card, TCP/IP for Windows 2000 is configured and set to DHCP
without your having to configure it. However, if there are problems, following the steps below to
configure TCP/IP with DHCP for Windows 2000.

Verify that Obtain an IP address

automatically radio button is selected and
that the Obtain DNS server address
radio button is selected.

• Click the OK button.

This completes the DHCP configuration in
Windows XP.

Repeat these steps for each PC with this
version of Windows on your network.

Click on the My Network Places icon on the Windows desktop. This will bring up a window
called Network and Dial-up Connections.

• Right click on Local Area Connection and select Properties.