NETGEAR ME103 User Manual
Page 56
Advertising
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
5-6
Advanced Configuration
August 2003
Figure 5-5: Information Activity Log for starting a 802.1x wireless connection
The simplest method is to ping the LAN IP address of another computer on the Ethernet LAN.
a.
From a wireless PC, on the Windows taskbar click the Start button, then click Run.
b.
Type
ping -t 192.168.0.1
, and click OK.
Figure 5-6: Running a Ping test from Windows
c.
This command causes a continuous ping to be sent. Between several seconds to two
minutes, the ping response should change from “timed out” to “reply.”
Advertising