Me103 wireless access point front panel, Me103 wireless access point front panel -6, The me103 access point provides three status leds – NETGEAR ME103 User Manual

Page 20: The following table explains the led indicators

Advertising
background image

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

2-6

Introduction

August 2003

ME103 Wireless Access Point Front Panel

The ME103 Access Point provides three status LEDs.

Figure 2-1: ME103 front panel

The following table explains the LED indicators:

LED

DESCRIPTION

Power

Off

On

Power Indicator

No power. If this LED does not come on with the power adapter and cord correctly
installed, see Chapter 4,

Troubleshooting

.

Power is on.

Blink

Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going on steady.

LAN

Ethernet LAN Link Activity Indicator

Off

Green On

Indicates no Ethernet link detected.
100 Mbps Fast Ethernet link detected, no activity.

Green Blink

Indicates data traffic on the 100Mbps Ethernet LAN.

Amber 0n

10 Mbps Ethernet link detected, no activity.

Amber Blink

Indicates data traffic on the 10Mbps Ethernet LAN.

Wireless LAN

Wireless LAN Link Activity Indicator

Off

Green On

Indicates no Ethernet link detected.
Wireless link enabled, no activity.

Green Blink

Wireless link activity.

PWR

LAN

802.11b

ProSafe Wireless Access Point

MODEL

ME103

Wireless LAN

Advertising