NETGEAR ME103 User Manual
Reference Manual for the ME103 802.11b ProSafe Wireless Access Point
Basic Installation and Configuration
The IP Address Source
The wireless access point is shipped preconfigured to use a private IP address on the LAN
side, and to act as a DHCP client. If the wireless access point does not find a DHCP server on
the Ethernet LAN, it defaults to this IP configuration:
IP Address— 192.168.0.224
IP Subnet Mask— 255.255.255.0
Gateway — 0.0.0.0
Primary DNS — blank
Secondary DNS — blank
If your network has a requirement to use a different IP addressing scheme, you can make those
changes in this menu. These settings are only required if the “Use this IP address” radio button
is chosen. Remember to click Apply to save your changes.
Access Point Name (NetBIOS)
Enter a new name for the wireless access point and click Apply to save your changes.
This allows your wirelessly connected PCs to browse the remote network using the Windows
Network Neighborhood feature. Select this check box, enter the WINS Server name or IP
address, and click Apply to save your changes.
This allows your take advantage of the management features supported in the ME103 MIBs.