NETGEAR ME103 User Manual

Page 68

Advertising
background image

Reference Manual for the ME103 802.11b ProSafe Wireless Access Point

6-4

Troubleshooting

August 2003

If the PCs are configured correctly, but still not working, ensure that the ME103 is connected
and turned on. Connect to it and check its settings. If you cannot connect to it, check the LAN
and power connections.

If the ME103 is configured correctly, check your Internet connection (DSL/Cable modem etc.)
to make sure that it is working correctly.

Using the Reset Button to Restore Factory Default Settings

The Reset button (see

“ME103 Wireless Access Point Rear Panel” on page 2-7

) has two functions:

Reboot. When pressed and released quickly, the ME103 will reboot (restart).

Reset to Factory Defaults. This button can also be used to clear ALL data and restore ALL
settings to the factory default values.

To clear all data and restore the factory default values:

1.

Power off the ME103 and power it back on.

2.

Use something with a small point, such as a pen, to press the Reset button in and hold it in for
at least 5 seconds.

3.

Release the Reset button.

The factory default configuration has now been restored, and the ME103 is ready for use.

Advertising