NEC ExpressA1160 User Manual
Page 102
Network
4-16
Figure 4-12 Settings Reserved
Other client applications that attempt to update the settings receive a message that
these settings are reserved. Well-behaved clients, such as the EXPRESSSCOPE®
Monitor interface and the remote console interface, do not change reserved
settings. However, other client applications are not precluded from changing these
settings. Changes made by any client applications appear on the LCD.
4. Press OK to continue updating settings.
An expanded network menu appears, as shown in
Figure 4-13
.
Figure 4-13 Expanded Network Menu
5. Navigate to the desired command, such as one of the following, press OK, and
follow the instructions related to the command.
• Set IP Addr, to change the IP address
Note: First be sure that DHCP is off.
• Revert Changes, to exit the menu without making changes
Note: If the menu times out, changes are reverted by default.
For example, to set the IP address